High Voltage Sensor (HV Sensor)

HV SENSOR (BIG) HV Sensor(SMALL)
 

Product Specification

IT IS HIGH VOLTAGE DETECTOR BY PROXIMITY. THE SENSOR SHOULD NEVER TOUCH CONDUCTORS AND MUST BE USED WITH AN INSULATED & GROUNDED FIBERGLASS ROD OR HOT STICK APPROPRIATELY RATED FOR THE VOLTAGE BEING TESTED. IT IS DESIGNED TO WARN THE USER FOR THE PRESENCE OF VOLTAGE IN A PARTICULAR WORK SITE. THE SENSOR USES AN INTERNAL SENSOR DESIGNED TO DETECT THE RADIATED ELECTRICAL FIELD PRESENT IN ENERGIZED CONDUCTORS. THE RADIATED ELECTRICAL FIELD INCREASES WITH THE LINE VOLTAGE BUT DECEASES WITH DISTANCE AND/ OR SHIELDING. THE SENSOR HAS EIGHT VOLTAGE RANGE SETTING, HIGHER THE SENSITIVITY TO DETECT THE ELECTRICAL FIELD : AND GREATER THE DETECTION DISTANCE. IT ALSO HAS AN “AUTO – TEST” SETTING TO CHECK FUNCTIONALLY. WHEN AN ELECTRICAL FIELD IS DETECTED, A SOUND ANNUNCIATION (HIGH-PITCH, HIGH-POWERED BUZZER) AND VISUAL INDICATOR (BRIGHT LED) ARE TRIGGERED ON, WARNING THE USER. SENSOR CAN BE USED TO DETECT ENERGIZED FIELD FOR SYSTEM UP TO 800 KV SAFELY.

DESCRIPTION : Non Contact High Voltage Sensors are useful, handy and safe device to detect presence of voltage by proximity. The ‘Sensor’ need not touch live conductors and should always be used with a ‘Hotline Stick’ (preferably a Fibre Glass Pole) suitably rated for the system voltage under test.

presence of voltage by proximity. The ‘Sensor’ need not touch live conductors and should always be used with a ‘Hotline Stick’ (preferably a Fibre Glass Pole) suitably rated for the system voltage under test.

The Sensor has selectable Voltage range settings (6 ranges in Model – 275 HTS and 2 in Model – 132 HTS). The sensitivity selectors can be chosen depending upon distance between ‘Sensor’ and the conductor.

The internal circuitry triggers the audible and visible (Buzzer and Neon) ‘ALARM’ when the sensor is brought in the radiated field. The radiated electrical field increases/decreases with variation in potential present in the conductor.

Selector Switch:-  OFF / SELF TEST / 240V-2KV-6KV-22KV-33KV-132KV 275KV  (275HTS).
HIGH (33KV-132KV) / OFF/ LOW(30V-33KV) (132HTS).

Alarm:- NEON / BUZZER.

Power :- 3 x1.5v “C” Cell Battery (275 HTS), 9V Battery(132 HTS).

Weight :- <600gm (275 HTS), <200gm (132HTS).

  • Sealed by “O” Rings.
  • High bright LEDs visual indication.
  • Sound indication.
  • Easy-to-prove method.
  • Self-test selection.
  • Use 3 X 1.5V “C” batteries.
  • High impact Nylon Casting.
  • Non-Contact work by proximity.
  • Compatible with most linked sticks.
  • Light weight , robust & compact.
  • Suitable for indoor and outdoor use.
  • Detect Low Voltage on any system.
  • Easy access to batteries.
  • No special parts needed.

Simple & Efficient to use.